
Winter Haven Cabinet Refacing
Crown Molding Addition in Winter Haven, FL
Custom-fit crown molding finishes refaced or existing cabinets with clean, decorative trim. Free estimates.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Winter Haven and nearby communities.
A lot of older Winter Haven kitchens were built without crown molding on top of the cabinets, which was common before it became a standard finishing touch. Crown molding addition adds that detail along the tops of your cabinet runs, cut and fitted to the actual angles of your kitchen rather than a generic strip.
Winter Haven Cabinet Refacing pairs this with refacing or door replacement jobs, or installs it on its own if your existing cabinets are in good shape.
What's included
What's included with Crown Molding Addition
Typically included: space measurement, molding profile selection, cutting and fitting to corners and angles, installation, and finish touch-ups to blend seams.
Optional: matching stain or paint to coordinate with recently refaced cabinets, corner molding blocks for complex angles.
Customer prep: clear countertop clutter below the cabinet runs so our crew has access to measure and install.
Want a clearer scope?
Get a Free EstimateHow it works
How our Crown Molding Addition process works
Step 1Space Measurement
Cabinet tops are measured to determine molding length and angles needed.
Step 2Molding Style Selection
Clients choose molding profiles that complement their cabinet design.
Step 3Cutting and Fitting
Molding pieces are cut to precise angles for proper corner fitting.
Step 4Surface Preparation
Cabinet tops are prepared to ensure secure molding attachment.
Step 5Molding Installation
Molding is attached and secured along the tops of cabinet runs.
Step 6Finish Touch-Ups
Seams and edges are finished to blend molding with existing cabinetry.
Materials
Materials and methods for Crown Molding Addition
Molding needs to hold its finish and fit tight against the ceiling line even as Florida humidity makes materials expand and contract seasonally.

Crown Molding Profiles
A range of molding profiles add decorative detail above cabinetry.

Wood Molding Strips
Solid wood strips provide a traditional, durable molding option that holds paint and stain well over time.

Molding Adhesive
Strong adhesive secures molding firmly to cabinet surfaces, important for a tight bond through humidity swings.

Finish Nails
Finish nails provide additional support for molding installation, backing up the adhesive bond.

Matching Stain or Paint
Finish is matched to existing cabinetry for a cohesive appearance.

Corner Molding Blocks
Corner blocks simplify fitting at complex cabinet angles common in older, non-standard kitchens.
Questions on materials?
Get a Free EstimateTimeline
How long does crown molding addition take?
This is a quick add-on project compared to a full refacing job.
- 01
Measurement visit
same day - 02
Material and profile selection
a few dayswithin
- 03
Fabrication and cutting
3–5 days - 04
Installation
1 day
Need a schedule that fits?
Get a Free EstimateCost
What does crown molding addition cost in Winter Haven?
Pricing is mostly driven by linear footage of cabinet runs and the molding profile you choose. These are honest ranges, not a fixed quote. Call for a free estimate based on your actual cabinet run length.
| Project type | Typical range | What’s included |
|---|---|---|
| Basic molding profile | $8-$14 | per linear foot, simple profile in standard wood species. |
| Decorative or custom profile | $14-$24 | per linear foot, more detailed molding shapes. |
| Full kitchen crown molding | $600-$1,800 | typical kitchen cabinet run lengths with standard profile. |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateCodes & permits
Permits and codes for Crown Molding Addition
This is cosmetic trim work. Still, confirm with Polk County or the City of Winter Haven if your project involves any structural changes to cabinet framing.
| Typically needs a permit | Often no permit |
|---|---|
| None for standard decorative molding installation | Molding measurement and cutting |
| — | Adhesive and nail installation above cabinet tops |
| — | Finish touch-ups |
Need help with permits?
Get a Free EstimateDIY vs pro
DIY vs hiring a pro for Crown Molding Addition
| DIY | Hire a pro |
|---|---|
| Installing a straight run of molding on a single, simple cabinet section | Cutting precise angles for corners, especially on older kitchens with non-square walls |
| Basic touch-up staining on pre-finished molding strips | Matching a new molding finish to existing or recently refaced cabinetry |
| — | Installing molding across a full kitchen's worth of cabinet runs |
Not sure DIY vs pro?
Get a Free EstimateWhen to call
When to call for Crown Molding Addition
- Your cabinets were never finished with molding and look unfinished at the top
- You just refaced or replaced doors and want a matching finishing detail
- Existing molding is damaged, outdated, or doesn't match a recent cabinet update
Seeing warning signs?
Get a Free EstimateNext step
Call [(863) 656-3842](tel:+18636563842) or request a free estimate to finish the look.
FAQs
Crown Molding Addition FAQs
Can crown molding be added without refacing my whole kitchen?
It's commonly installed as a standalone finishing touch on cabinets that are otherwise in good shape.
How is molding priced?
Pricing is based on linear footage of cabinet runs, typically $8 to $24 per foot depending on the profile complexity.
Will the molding match my existing cabinet finish?
We match stain or paint to your current cabinetry as closely as possible, or coordinate the finish if you're doing molding alongside a refacing job.
How long does installation take?
Most kitchens take about a day to install once the molding has been cut and fitted to your cabinet angles.
Does crown molding work on older kitchens with uneven walls?
Yes. We cut molding to fit the actual angles in your kitchen rather than assuming square corners, which matters in a lot of older Winter Haven homes.
More services
Other Cabinet Refacing services

Cabinet Refacing
Cabinet Refacing with new doors, veneer, and hardware over your existing boxes. Free estimates, Winter Haven.

Kitchen Cabinet Refacing
New doors, veneer boxes, and hardware over your existing kitchen layout. Free estimates.

Bathroom Vanity Refacing
Bathroom vanity refacing in Winter Haven, FL with moisture-sealed finishes. New doors, drawer fronts, and hardware. Free estimates.
Ask about Crown Molding Addition
Tell us about the project and how to reach you.