
Winter Haven Cabinet Refacing
Custom Cabinet Doors in Winter Haven, FL
Custom cabinet doors in Winter Haven, FL built to fit odd or older openings, with shaker, raised panel, and flat panel options. Free estimates.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Winter Haven and nearby communities.
Not every cabinet box in a Winter Haven home matches an off-the-shelf door size, especially in older kitchens where openings were framed before manufacturers standardized dimensions. Custom cabinet doors are built to the exact measurements of your existing boxes, so you get a new look without tearing out cabinetry that's still structurally fine. Winter Haven Cabinet Refacing fabricates doors to fit, not the other way around.
This service covers doors and drawer fronts only. If your boxes need veneer work too, pair this with full cabinet refacing for a complete match.
What's included
What's included with Custom Cabinet Doors
Typically included: precise door measurement, style and wood species selection, custom fabrication, hinge boring, and installation with alignment check.
Optional: glass insert panels, decorative profile edges, specialty stain matching to existing woodwork.
Customer prep: clear access to cabinets during measurement and installation visits, and a decision on hinge style (concealed vs exposed) before fabrication starts.
Want a clearer scope?
Get a Free EstimateHow it works
How our Custom Cabinet Doors process works
Step 1Design Consultation
Clients discuss custom shapes, profiles, and finishes for their cabinet doors.
Step 2Precise Measurements
Exact measurements are taken to ensure a perfect custom door fit.
Step 3Material Selection
Wood species and finish options are chosen to match design goals.
Step 4Custom Fabrication
Doors are crafted to specified dimensions, profiles, and finish details.
Step 5Finish Application
Selected stains or paints are applied to complete the custom look.
Step 6Installation and Fit Check
Doors are installed and checked for proper alignment and smooth operation.
Materials
Materials and methods for Custom Cabinet Doors
Each door is built from materials chosen to hold a tight seal against humidity swings, not just look good on install day.

Custom Wood Species
A variety of wood species are available for unique custom door designs, picked for how they respond to Central Florida's moisture levels.

Decorative Panel Inserts
Decorative inserts add texture and visual interest to custom doors without changing the box underneath.

Custom Profile Edges
Edge profiles can be shaped to match specific design preferences on older, non-standard openings.

Specialty Stains
Specialty stains create unique tones to complement custom cabinetry and existing trim.

Custom Hardware
Unique hardware options are selected to complete the custom door look.

Mortise Hinges
Mortise hinges provide a traditional, durable option that holds up under repeated daily use.
Questions on materials?
Get a Free EstimateTimeline
How long does custom cabinet doors take?
Custom doors take longer than stock replacements because every piece is built to order rather than pulled from a catalog.
- 01
Measurement visit
same day - 02
Design and material selection
a few dayswithin
- 03
Fabrication lead time
2–3 weeks - 04
Installation
1 day
Need a schedule that fits?
Get a Free EstimateCost
What does custom cabinet doors cost in Winter Haven?
Pricing depends on wood species, door count, and how many openings are non-standard sizes. These are honest ranges, not a fixed quote. Call for a free estimate once we've measured your actual openings.
| Project type | Typical range | What’s included |
|---|---|---|
| Stock-size custom doors | $120-$220 | per door, standard shaker or flat panel in common wood species. |
| Non-standard openings | $180-$320 | per door, built to exact measurements for older or mismatched boxes. |
| Premium wood with glass inserts | $280-$450 | per door, hardwood species with decorative glass panels. |
| Full kitchen custom door set | $2,800-$7,500 | 15-25 doors and drawer fronts with matched finish. |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateCodes & permits
Permits and codes for Custom Cabinet Doors
Permit requirements vary by project scope. Verify specifics with Polk County or the City of Winter Haven building department before work begins.
| Typically needs a permit | Often no permit |
|---|---|
| Projects that involve relocating cabinet boxes or framing changes | Custom door fabrication and installation on existing openings |
| — | Hinge boring and hardware attachment |
| — | Finish application (stain |
| — | paint |
| — | sealant) |
Need help with permits?
Get a Free EstimateDIY vs pro
DIY vs hiring a pro for Custom Cabinet Doors
| DIY | Hire a pro |
|---|---|
| Swapping hardware on doors you already have | Measuring and fabricating doors for non-standard or older cabinet openings |
| Minor touch-up staining on existing wood doors | Matching wood grain and stain across multiple doors in a kitchen |
| Ordering stock-size replacement doors for standard openings | Hinge boring that needs to align with existing cabinet frames |
Not sure DIY vs pro?
Get a Free EstimateWhen to call
When to call for Custom Cabinet Doors
Call (863) 656-3842 or request a free estimate to get exact measurements and a quote.
- Your cabinet openings don't match any stock door size you can find
- You want a specific wood species or profile not sold off the shelf
- Existing boxes are solid but the doors look dated or damaged
Seeing warning signs?
Get a Free EstimateFAQs
Custom Cabinet Doors FAQs
Can you match custom doors to my existing cabinet boxes?
Yes. We measure your existing openings and hinge locations so new doors fit without modifying the boxes.
How long does it take to get custom doors made?
Fabrication typically runs 2-3 weeks after measurements and material selection are finalized, plus a half day to a day for install.
Are custom doors more expensive than stock replacements?
Usually somewhat more, since each door is built to order rather than mass produced. The cost difference is often small for standard sizes and larger for non-standard openings.
Can I choose any wood species for custom doors?
We offer a range of wood species and finishes. Availability and lead time vary by species, so we'll confirm options during your consultation.
Do custom doors come with new hardware?
Hardware is priced separately but can be bundled with your door order. We'll help you pick pulls and hinges that match the new door style.
Will custom doors warp in Florida humidity?
Properly sealed wood and quality finish coats resist the warping that comes from humidity swings. We discuss finish options suited to your kitchen or bathroom during the consult.
More services
Other Cabinet Refacing services

Cabinet Refacing
Cabinet Refacing with new doors, veneer, and hardware over your existing boxes. Free estimates, Winter Haven.

Kitchen Cabinet Refacing
New doors, veneer boxes, and hardware over your existing kitchen layout. Free estimates.

Bathroom Vanity Refacing
Bathroom vanity refacing in Winter Haven, FL with moisture-sealed finishes. New doors, drawer fronts, and hardware. Free estimates.
Ask about Custom Cabinet Doors
Tell us about the project and how to reach you.